Heat stress monitoring for crops
Crop-specific temperature threshold, number of days above the threshold and phenological sensitivity at field level. Completely free.
Completely free · Try it without signing inA heatwave does not affect every crop equally
Heat stress risk is not determined by a single temperature value, but by on how many days and by how much the temperature exceeds the crop's critical threshold, and in which growth stage this happens. Thirty-five degrees causes a temporary setback in the vegetative phase, but direct yield loss at flowering.
For the selected field Meteon gives the crop's critical daily maximum, the number of days exceeding it in the forecast and the expected peak temperature. The risk level rises to the top category when the peak exceeds the threshold by at least three degrees.
Taking the phenological stage into account
The system treats flowering, tasseling, heading and grain fill as sensitive growth stages. In these stages the effect of heat load is disproportionately greater, so the model signals elevated risk even with fewer days.
The growth stage can be calculated from the sowing date and accumulated heat units, or entered directly. An entered stage refines the assessment, because the model then measures heat load against the actual growth stage.
Heat load and water supply should be read together
High temperature also increases evaporation losses, so heat stress and water deficit typically develop at the same time. In the daily output reference evapotranspiration appears alongside the temperature data, so you can see whether, besides the heat load, the water supply has also come close to the intervention level.
Heat stress monitoring is part of the Agronomy plan. The detailed irrigation water balance is handled by the irrigation module , and stressed zones can be mapped via the satellite layer .
Heat stress FAQ
What does the heat stress assessment take into account?
The crop's critical daily maximum temperature, the number of days exceeding it in the forecast, the expected peak temperature and the current phenological stage. The risk is rated high when the peak exceeds the threshold by at least three degrees.
Why does the growth stage matter?
The same temperature causes considerably greater yield loss at flowering, tasseling, heading and grain fill than in the vegetative phase. The system therefore assesses the risk more strictly in sensitive growth stages.
What is the difference between heat stress and water deficit?
The two often occur together but are not the same. Heat stress is the direct physiological effect of temperature; water deficit is the lack of available water. Irrigation can reduce the consequences of heat load, but exceeding the temperature threshold is a risk in itself.