All free tools
Calculator · volume and duration

Irrigation calculator: water volume and running time

Already know the water depth you plan to replace? Calculate the gross water volume and operating time for a flow rate you supply.

Free · no registration
Your calculation inputs

Use a decimal comma or point, without thousands separators. Both 12.5 and 12,5 mean twelve and a half.

You choose the target net depth. This calculator does not determine the crop's water requirement.

Enter your own measured or known efficiency as a percentage. The calculator does not choose an irrigation system or efficiency for you.

The constant total supply for the entered area, in m³/hour. Runtime excludes pauses and changes between irrigation zones.

Result from your inputs

Enter your values to see a result. Calculations update immediately; no registration is needed.

A water-volume planner using the net depth and efficiency you choose. It does not determine whether, when or how much you should irrigate.

How is this calculated?

Litres = rainfall (mm) × area (m²). Cubic metres = litres ÷ 1000. One hectare is 10,000 m².

Gross depth = net depth ÷ (efficiency ÷ 100). Gross volume (m³) = gross depth (mm) × area (ha) × 10.

Runtime (hours) = gross volume (m³) ÷ total flow rate (m³/hour).

Reference for net and gross application depth: FAO, Irrigation scheduling (Chapter 6).

How irrigation water is calculated

Net irrigation depth is the useful water depth you want to supply. Gross water volume is higher when the system has losses. The calculator uses the efficiency you enter; it does not measure your installation.

Gross depth (mm) = net depth (mm) / (efficiency / 100). Volume in m³ = gross depth × area in m² / 1,000. If you enter total actual flow in m³/h, operating time equals total m³ divided by m³/h.

This tool does not determine the net depth your crop needs. That depends on root-zone depletion, crop development, weather and soil. Duration assumes a constant flow; sequential operation of multiple irrigation zones needs separate planning.

Frequently asked questions

Which efficiency should I enter?

Use your system's known or measured overall efficiency. The calculator accepts 0.1–100%. The field starts empty; you supply the efficiency.

Why is gross volume larger than net volume?

At efficiency below 100%, some applied water does not usefully reach the target. The calculation increases gross depth according to the efficiency entered.

Does it tell me when to irrigate?

No. It converts the supplied depth into volume and optionally time. Scheduling needs local soil and weather information.

Sources and method

FAO – Irrigation scheduling, Chapter 6
Irrigation calculator: water volume and running time — Meteon